Master en Comunicación Cisco Systems Voz Ip

CERTIFICACIÓN CCNA 

Módulo 1:

1.1.   Introducción a networking

1.2.   Aspectos básicos de networking

1.3.   Medios de networking

1.4.   Prueba del cable

1.5.   Cableado de las LAN y las WAN

1.6.   Principios básicos de Ethernet

1.7.   Tecnologías de Ethernet

1.8.   Conmutación de Ethernet

1.9.   Conjunto de protocolos TCP/IP y direccionamiento IP

1.10.    Principios básicos de enrutamiento y subredes

1.11.    Capa de aplicación y transporte de TCP/IP

Módulo 2:

2.1    WAN y Routers

2.2    Configuración del router

2.3    Introducción a los routers

2.4    Información sobre otros dispositivos Administración del software Cisco IOS

2.5    Enrutamiento y protocolos de enrutamiento

2.6    Protocolos de enrutamiento por vector-distancia

2.7    Mensajes de control y de error de los protocolos TCP/IP

2.8    Diagnóstico básico de fallas del router

2.9    Listas de control de acceso (ACL)

2.10  TCP/IP intermedio

Módulo 3:

3.1.   Introducción al enrutamiento sin clase

3.2.   OSPF de una sola área

3.3.   EIGRP

3.4.   Conceptos sobre la conmutación

3.5.   Configuración de switch

3.6.   Switches

3.7.   Protocolo Spanning-Tree

3.8.   LAN virtuales

3.9.   Protocolo de enlace troncal de VLAN

Módulo 4:

4.1    Escalabilidad de direcciones IP

4.2    Tecnologías WAN

4.3    PPP

4.4    ISDN y DDR

4.5    Frame Relay

4.6    Introducción a la administración de redes

NS1  NETWORK SECURITY 1

Module 1: Vulnerabilities, Threats and Attacks

1.1    Introduction to Network Security

1.2    Introduction to Vulnerabilities, Threats and Attacks

1.3    Attack Examples

1.4    Vulnerability Analysis

Module 2: Security Planning and Policy

2.1    Discussing Network Security and Cisco

2.2    Endpoint Protection and Management

2.3    Network Protection and Management

2.4    Security Architecture

2.5    Basic Router Security

Module 3: Security Devices

3.1    Device Options

3.2    Using Security Device Manager

3.3    Introduction to the Cisco Security Appliance Family

3.4    Getting Started with the PIX Security Appliance

3.5    PIX Security Appliance Translations and Connections

3.6    Manage a PIX Security Appliance with Adaptive Security Device Manager (ASDM)

3.7    PIX Security Appliance Routing Capabilities

3.8    Firewall Services Module (FWSM) Operation

Module 4: Trust and Identity Technology

4.1    Authentication, Authorization and Accounting (AAA)

4.2    Authentication Technologies

4.3    Identity Based Networking Services (IBNS)

4.4    Network Admission Control (NAC)

Module 5: Cisco Secure Access Control Server

5.1    Cisco Secure Access Control Server (CSACS) for Windows

5.2    Configuring RADIUS and TACACS with CSACS

Module 4: Trust and Identity Technology

4.1    Authentication, Authorization and Accounting (AAA)

4.2    Authentication Technologies

4.3    Identity Based Networking Services (IBNS)

4.4    Network Admission Control (NAC)

Module 5: Cisco Secure Access Control Server

5.1    Cisco Secure Access Control Server (CSACS) for Windows

5.2    Configuring RADIUS and TACACS with CSACS

Module 6: Configure Trust and Identity at Layer 3

6.1    Cisco IOS Firewall Authentication Proxy

6.2    Introduction to PIX Security Appliance AAA Features

6.3    Configure AAA on the PIX Security Appliance

Module 7: Configure Trust and Identity at Layer 2

7.1    Identity-Based Networking Services (IBNS)

7.2    Configuring 802.1x Port-Based Authentication

Module 8: Configure Filtering on a Router

8.1    Filtering Technologies

8.2    Cisco IOS Firewall Context-Based Access Control

8.3    Configure Cisco IOS Firewall Context-Based Access Control

Module 9: Configure Filtering on a PIX Security Appliance

9.1    Configure ACLs and Content Filters

9.2    Object Grouping

9.3    Configure a Security Appliance Modular Policy

9.4    Configure Advanced Protocol Inspection

Module 10: Configure Filtering on a Switch

10.1 Introduction to Layer 2 Attacks

10.2 MAC Address, ARP, and DHCP Vulnerabilities

10.3 VLAN Vulnerabilities

10.4 Spanning-Tree Protocol Vulnerabilities

NS2  NETWORK SECURITY 2

Module 1: Intrusion Detection and Prevention Technology

1.1    Overview of Intrusion Detection and Prevention

1.2    Inspection Engine

1.3    Cisco IDS and IPS Devices

Module 2: Configure Network Intrusión Detection and Prevention

2.1    Cisco IOS Intrusion Prevention System

2.2    Configure Attack Guards on the PIX Security Appliance

2.3    Configure Intrusion Prevention on the PIX Security Appliance

2.4    Configure Shunning on the PIX Security Appliance

Module 3: Encryption and VPN Technology

3.1    Encryption Basics

3.2    Integrity Basics

3.3    Implementing Digital Certificates

3.4    VPN Topologies

3.5    VPN Technologies

3.6    IPSec

Module 4: Configure Site-to-Site VPN Using Pre-shared Keys

4.1    Prepare a Router for Site-to-Site VPN Using Pre-shared Keys

4.2    Configure a Router for IKE Using Pre-shared Keys

4.3    Configure a Router with IPSec Using Pre-shared Keys

4.4    Test and Verify the IPSec Configuration of the Router

4.5    Configure a PIX Security Appliance Site-to Site VPN using Pre-shared Keys

Module 5: Configure Site-to-Site VPNs Using Digital Certificates

5.1    Configure CA Support on a Cisco Router

5.2    Configure an IOS Router Site-to-Site VPN Using Digital Certificates

5.3    Configure a PIX Security Appliance Site-to Site VPN Using Digital Certificates

Module 6: Configure Remote Access VPN

6.1    Introduction to Cisco Easy VPN

6.2    Configure the Easy VPN Server

6.3    Configure Easy VPN Remote for the Cisco VPN Client 4.x

6.4    Configure Cisco Easy VPN Remote for Access Routers

6.5    Configure the PIX Security Appliance as an Easy VPN Server

6.6    Configure a PIX 501 or 506E as an Easy VPN Client

6.7    Configure the Adaptive Security Appliance to Support  Web VPN

Module 7: Secure Network Architecture and Management

7.1    Layer 2 Security Best Practices

7.2    SDM Security Audit

7.3    Router Management Center (MC)

7.4    Simple Network Management Protocol (SNMP)

Module 8: PIX Security Appliance Contexts, Failover and Management

8.1    Configure a PIX Security Appliance to Perform in Multiple Context Mode

8.2    Configure PIX Security Appliance Failover

8.3    Configure Transparent Firewall Mode

8.4    PIX Security Appliance Management

1. Conocimiento básico del sistema Operativo Linux

2. Configuración de interfaces de red

3. Enrutamiento bajo Linux

4. Configuración y gestión de Zebra

5. Firewall sobre Linux

6. Instalación y configuración de programas de monitorización de red

7. Utilización de programas de monitorización de redes

 VOZ SOBRE IP

1. Visión General PSTN y comparación con Voip

2. Fundamentos de Voip

3. Protocolos involucrados en Voip

4. Calidad de Servicio

5. Dispositivos necesarios